Cómo purgar los frenos de una moto

Brake failures are among the most common motorcycle breakdowns, which is why proper maintenance is essential. In this regard, it is crucial to follow the following steps to bleed the motorcycle brakes. This way, keeping a motorcycle in perfect condition for longer will be possible.

Steps to Bleed Motorcycle Brakes

Among the different methods to bleed motorcycle brakes, here is a very effective one. In fact, these tips for bleeding motorcycle brakes are applicable to many models. Simply pay attention and follow the steps carefully.

Prepare the Necessary Materials

Gather the necessary tools: screwdrivers, wrenches, transparent tubes, and even a syringe to extract the used brake fluid. Next, prepare a container to collect the fluid. However, a more sophisticated bleeding system with a check valve can also be used. It is also recommended to protect the motorcycle from possible splashes.

Drain the Fluid and Fill the Reservoir with New Fluid

The next step is to open the brake reservoir with an appropriate screwdriver and remove the used fluid. For this, a syringe or an absorbent cloth can be useful to gradually remove the fluid. Then, fill the reservoir with new, high-quality fluid.

Attach the Tube and Container to Bleed the Brake Fluid

On the brake caliper, remove the rubber cap protecting the bleeder screw and first place the flat wrench. Then connect the tube and container assembly to the screw. Next, press the brake lever as if braking and loosen the bleeder screw with the flat wrench.

You’ll notice that the pressure softens and the circuit fluid replaces the old one. Now it’s time to tighten the screw without releasing the lever, to prevent air from entering the circuit.

Check the Level and Complete the Bleeding

Repeat this process until the equivalent of one or two reservoirs of fluid per caliper is drained. Once completed, close the reservoir and check that everything is in order. This check will be done by testing the feel of the brake lever, which should be firm.

Clean Stains and Check the Brakes

The last step is to clean any possible stains with a clean cloth and check the braking again. Without a doubt, this is one of the best methods for bleeding motorcycle brakes.

In summary, thanks to these steps for bleeding motorcycle brakes, you can have a safer vehicle when braking. With these tricks for bleeding motorcycle brakes, you will know how to pass the motorcycle inspection. Knowing how to perform this maintenance makes routes safer. At Little Way, we invite you to check out our catalog of foldable motorcycle trailers.